Knowlege Base

  • A40 Tower Fan

    • The tower fan does not work properly

      • Check that the power plug of the tower fan is plugged in a 120 AC outlet
      • Check to make sure that the outlet is not overloaded
      • Check the power and make sure the towr fan is turned on
      • Check that all parts securely locked in place

      The Airflow has decreased

      • Check that the air intake and exhaust are not blocked
      • Check and make sure there are no objects obstructing the air flow intake
      • The output may be blocked by dust. If so, follow the cleaning instructions on page 10

      The remote control does not operate the fan

      • Make sure the battery is correctly installed. It requires 1 X CR2032 lithium battery 3V
      • Make sure the remote is pointed toward the fan
      • Make sure the battery is not expired
      • Make sure your remote is paired with the fan.
      1. Unplug and plug back the fan.
      2. Press and hold the “power” & “Oscillation” buttons for 3 sec. until you hear a beep from the fan, and the fan will turn on after pairing process is complete.

      The fan is not secure and moves during operation

      • Make sure that the fan base is securely fastened and clipped together
      • Make sure the tower motor is securely locked onto the base
      • Make sure the fan body is locked onto the tower motor

      The fan(s) are missing parts?

      • Please contact the customer service department service@theaspen.com Or call 1-877-365-3464 M-F, 8am-3pm Pacific Time.
      • For the remote: Go to https://www.theaspen.com/collections/tower-fan-accessories to purchase it.

      How to Clean the Fan Body?
      How to clean the fan motor and base?

      • Unplug the fan from the AC outlet
      • Use a soft cloth to wipe down the exterior
      • DO use water or any other chemical solution or cleaner
      • DO Not soak or immerse the Fan Motor in water or liquid

      How do I store the fan?

      • It is recommended to not fully dissemble the fan.
      • Store in a dry place away from
      • Make sure the fan body is locked onto the tower motor

      Remote Control Battery Replacement

      • Pull and slide out the tab on the right side of the remote to remove the battery compartment
      • Replace the battery with a CR2032 Lithium Battery
      • Slide the tab back into position until it locks back into the remote

      How to turn on the fan if I lost my remote?

      Please use the “emergency button” located on the back of the bottom motor. The button only controls the fan speeds. First press = level 1, second press = level 2, third press = level 3, fourth press = level 4, fifth press = Off.

      How to Assemble the Aspen Tower Fan Body to the Motor?
      How to Secure the Tower Fan Base?
  • ASP 200

    • I’m having trouble connecting WiFi?

      2.4GHz Wi-Fi connection required to use smart features. To connect, follow the mobile App instructions to finish network connection. Press and hold the WiFi button for 5 seconds until the WiFi light blinks rapidly. Then enter your WiFi information to connect. For more questions, please visit http://www.aspenapplianceinc.com/ for video guides or contact customer service at: service@aspenapplianceinc.com or call 1-877-365-3464.

      • Note: Most new home router models support both 5 GHz and 2.4 GHz bands and will automatically detect and connect devices using the optimal channel to deliver the best WiFi signal at any given time. If you don't see the WiFi channel settings for 2.4 and 5 GHz, this means these settings are managed automatically

      • Reset the device first

      • Make sure device is plugged in and fan is turned off. Hold the WiFi button for 5 seconds until WiFi indicator light begins flashing rapidly. (2 times per second)

      • To connect in EZ mode (Recommended)

      • The WiFi indicator light needs to be set to rapid flashing. Please follow the 3 steps below to finish setting

      • 1. Make sure device is plugged in and fan is turned off.

      • 2. Hold the WIFI button for 5 seconds until WiFi indicator light begins flashing rapidly.

      • 3. Confirm the WiFi indicator light blinks 2 times per second.

      • 4. Confirm indicator rapidly blink.

      • To connect in AP mode

      • The WiFi indicator light needs to be set to slow flashing (blink every 3 seconds). Please follow the 4 steps below to finish setting.

      • 1. Make sure device is plugged in and fan is turned off.

      • 2. Hold the WiFi button for 5 seconds.

      • 3. Confirm indicator light is now rapidly flashing. Then take the next step.

      • 4. Hold the WiFi button for 5 seconds again until indicator light is slowly flashing.

      • *1 Device only supports 1 login account, if you would like to have more users, please “add family member” under Home Management. One account can manage multiple families at the same time.

      • *If any error occurs, please unplug the device and wait for 10 seconds and plug in and try setup again.

      Where do I find the "AspenHome" App for Aspen Smart Window Fan?
      1. Simply go to the App Store (IOS) or Google Play Store (Android) and search for "AspenHome".
      2. Google Play Store
      3. Apple App Store
      Do Aspen Home products work with both Amazon Alexa and Google Home?

      Yes, they do. You can either set up the devices to be controlled via Alexa or Hey Google!

      Do I use the Google Home or Google Assistant APP?

      Always use the Google Home APP.

      What happens to my window fan if my WiFi stops working?

      The device will still turn on/off regardless if your WiFi is working or not, the functionality of your WiFi is only for remote controlling via APP and voice controlling your device, both which will not be available while your WiFi is down.

      The window fan does not work properly.

      Check that the power plug of the window fan is plugged in a 120V AC outlet.

      Check to make sure that the outlet is not overloaded.

      Check the power and make sure the window fan is turned on

      Check the security locks and both fan grills are securely locked.

      Check to make sure the temperature setting is lower than the room temperature.

      The airflow has decreased.

      Check that the air intake and exhaust are not blocked.

      Check that the airflow screen of the window fan is locked.

      Adjust the airflow to cool, exhaust or circulate.

      The remote control does not operate the fan.

      Make sure the battery correctly installed. Required 1x

      CR2025 LITHIUM BATTERY 3V (NOT INCLUDED)

      Make sure the remote is pointed toward front infrared of the fan.

      Make sure the battery is not expired.

      The fan(s) are missing parts.

      Contact customer service at: service@aspenapplianceinc.com or call 1-877-365-3464

      The fan is not secure in my window and moves during operation.

      Please ensure the bottom edge of the window sash fits into the groove along the top of the fan. Make sure it’s completely secure. Refer to the Window Fan Installation section.

      My window fan will not fit horizontally in the window.

      Fan can be installed in vertically or horizontally. Please note that when installing vertically, the builtin adjustable extender panel must be located on top of the fan and never on the bottom. Refer to the Window Fan Installation section.

  • How to Videos

    • Introduction to the ASP 200
      How to Install and Clean your ASP 200
      AspenHome - Indroducing AspenHome App
      AspenHome - How to Download ApenHome App
      Google Assistant - Connect Google Assistant to Aspen Smart Fan
      Alexa - Connect Alexa to Aspen Smart Fan
      Wifi Setup - EZ Mode
      WiFi Setup - AP Mode
      How to Replace Battery for your Smart Window Fan Remote Control?
      Cleaning/Reassembly

      Provided below is our "Cleaning and Reassembly Guide", that will provide you a simple rundown on how to clean your ASP 200 and put it back together.

      ASP 200 Cleaning Reassembly

      ASP 200 Cleaning

      How to Connect to WiFi
      How to Connect to Alexa
      How to Connect to Google Assistant
      How to set a schedule on the App?

      Do NOT use the “Schedule” inside the Window Fan App. The “Schedule” inside the Window Fan App can only schedule to turn off the fan. If you want to set an automated schedule to turn ON and turn OFF the fan, please use “Smart” which located at the bottom menu before you go into Window Fan control panel. After you tap “Smart”, please choose “Automation” to set the schedule. Click here for step by step instruction video.

  • Additional Support

    • Google Home - Set Up

      Google Action and Aspen® smart home products work together to help you easily control your smart device(s) by conveniently turning your voice into a remote control for your window fan.


      Please follow the steps below to connect Google Assistant on Google Home to your Aspen® home products:

      1. Download our AspenHome app in Google Play or App Store

      2. Register AspenHome account in our app

      3. Aspen® smart home device(s) must be nearby in order to connect

      4. Log into Google Home app

      5. Select “Add” / “+”, then select “Set up device”

      6. Select “Have something already set up?” and search for “Aspen Home” in the search bar

      7. Select the AspenHome app to begin integration

      8. Link your AspenHome account with Google then select “Agree and link”

      9. Select device “Window Fan” to complete linking

      Google Home Voice Commands

      “Hey Google, turn on "Window Fan"

      “Hey Google, turn off "Window Fan"

      “Hey Google, set "Window Fan" speed to 1”

      “Hey Google, set "Window Fan" speed to 2”

      “Hey Google, set "Window Fan" speed to 3”

      “Hey Google, What’s the "Window Fan" speed now?”

      Amazon Alexa - Set Up

      Amazon Alexa and the Aspen® smart home products work together to help you easily control your home appliances.


      Please follow the steps below to connect Alexa to your Aspen® Home products:

      1. Download our AspenHome app in Android or IOS app market

      2. Register AspenHome account in our app

      3. Aspen smart home device(s) must be nearby in order to connect

      4. Configure your smart device (Window Fan) with our AspenHome app and set a name, if desired, for your device(s) which will be used in "Window Fan”

      5. Log into Amazon Alexa app

      6. Tap the menu button located at the upper left corner and select “Skills and Games”

      7. Enter “Window Fan” in the search bar, then select “Window Fan”

      8. Select “Enable to Use”, you will then be navigated to link your AspenHome account with Amazon Alexa then select “Agree and link”

      9. Follow the instructions on the screen to complete linking

      10. Once authorized, select “DISCOVER DEVICES” in Alexa app to find your AspenHome device(s)

      11. If you want to change your smart device (Window Fan) name, go back to step (4).

      *Please note that if you need to add more devises in the future, you will need to Discover Devices again.

      Amazon Alexa - Voice Commands

      “Alexa, turn on Window Fan"

      “Alexa, turn off Window Fan”

      “Alexa, set Window Fan speed to 3"

      “Alexa, set Window Fan speed to 2"

      “Alexa, set Window Fan speed to 1"

      App Control

      Please have a compatible IOS or Android device with WiFi enabled


      How to connect:

      1. Find “AspenHome” APP in IOS and Android or Scan QR Code to download to enjoy optional scheduling functions and speeds from your smartphone.

      2. Make sure that the device is plugged in and the fan is turned off. Hold the WiFi button for 5 seconds until WiFi indicator light begin flashing rapidly (blink 2 times per second).

      3. Follow the instruction on AspenHome App to set up Fan WiFi connection. The process may take up to 2 minutes, during this state the fan’s digital display will be showing a rotating sign.

      4. After the connection is successfully made, the buzzer will beep for 1.5 seconds and the WiFi successful connection state will be entered.

      5. If the WiFi timesout or the connection fails, please repeat steps 1–3. Unplug the device and wait for 10 seconds and then plug the device back in to reset the WiFi indicator light to rapid flashing.


      Or you may select “Other Mode” and follow the instructions to complete the setup. After completing the above operation, the entire unit will continue to operate normally.

      App Features
  • ASPA 400 Smart Air Purifier

    • How big of an area will this clean and what is the CADR (Clean Air Delivery Rate)?

      The Aspen Air Purifier recommended room size is 362 square feet. The CADR is Smoke: 232 Dust: 242 Pollen: 248.

      Is the Air purifier good for allergies?

      Yes. Air purifiers help with capturing particles like dust, pollen, and depending on your filter will remove animal dander. All of which are the most common allergy triggers. The Aspen Smart Air Purifier is designed to capture the airborne particles, giving you cleaner and fresher air.

      Where’s the best location to put my air purifier?

      The air purifier works best in areas with the most airflow including windows, doors, or walls. Place the back side of the air purifier along the wall of the room and keep furniture at least two feet away from the sides.

      What type of sensors does my unit have?

      The Aspen Smart Air Purifier has a built-in PM 2.5 sensor that can detect particles that are 2.5 microns or smaller. This will give you and your air purifier a more accurate reading of the air quality in the area and help you to adjust your air purifier to the correct mode.

      What is the 3 Stages of Air Cleaning?

      The air filter is comprised of three parts: the pre-filter, true HEPA filter, and activated carbon filter. The pre-filter will capture initial dust and allergen particles. The True HEPA filter will trap smaller particles Such as airborne allergens including pollen, dust, smoke, pet dander, bacteria, viruses, and other ultrafine particles as small as 0.003 microns. The carbon filter reduces airborne chemicals from household cleaners, paints, carpets and furniture while absorbing odors emitted by them. Together they create a 3-stage filtration system.

      How many fan speeds does my unit have?

      There are 3 fan speeds. Low, Medium, and High.

      An odor is coming from the air purifier. What should I do?

      With a brand-new air purifier, sometimes the materials may get exposed to dust and other contaminants during the packaging and shipping process. But don’t worry, run the air purifier for 24-48 hours and the order should clear up. Make sure to remove the plastic cover from the filter before placing it in the air purifier.

      However, if the odor does not clear up, the filter may be contaminated. If so, please replace the carbon and HEPA filter and clean the pre filter.

      There is a strange sound coming from the air purifier.

      Check the parts of the air purifier and make sure everything is secure. If there are any loose parts on the air purifier, contact our support for further assistance.

      What certifications do the air purifiers have?

      - ETL
      - FCC
      - CARB

      Can I leave my air purifier on all the time?

      For best results, it recommended to always keep your air purifier on. This will increase the air purifiers capacity to filter the air within the room. The Air Purifier comes with Auto Mode, which will increase/decrease the fan speed depending on the air quality.

    • Air Filter

      • How often do I need to replace the filters?

        The life expectancy of your filter will be dependent on the environment it is in. In general, it is recommended to change the filters every 9-12 months.

        How do I replace the filter?

        1.) Remove the front panel on the air purifier by holding from the side of the front panel and pulling near the top.
        2.) After removing the front panel, remove the filter from the air purifier
        3.) Remove the plastic cover from the new filter
        4.) Place the new filter with the Air Flow arrow point towards the air purifier. The order of the filter should be pre filter > HEPA filter > Carbon filter
        5.) Align the slots of the front panel with the air purifier and push it back in.

        Can I clean the filter?

        We do not recommend washing the air filters. If needed, you may lightly vacuum the prefilter to remove any large debris caught by the mesh. However, he to keep the best air quality, it is recommended to change the filter when the filter indicator light comes on.

        My air purifier is flashing red. What do I do?

        When the LED indicator light is flashing red, that means it is recommended to change the air filter.

        How do I reset the filter indicator light?

        You put in a new filter, but the red light is still illuminated. Please note that the filter can only be reset in the app. After replacing the filter, follow the instructions in the app to reset the filter life. This will turn the light green.

    • How To Use The Device

      • How do I change the mode on my air purifier?

        The air purifier was designed for easy control and a one button solution.
        1.) Tapping the power button will change the modes of the air purifier from auto, low, medium, and high.
        2.) Press and hold the power button for 3 seconds to turn the air purifier off or put it on standby
        3.) Press and hold the power button for 10 seconds to put the air purifier into pairing mode, the LED will flash Reb & Blue.

        What is the LED air quality indicator?

        The air quality indicator is the LED light around the power button. The color of the LED will give you a visual indicator of the quality of the air in the area. The color levels correspond to the following statuses
        Green = Excellent
        Blue = Good
        Yellow = Moderate
        Red = Bad
        If the air purifier is set on Auto Mode, the air purifier will automatically adjust the fan speed according to the air quality. If the air purifier is in Sleep Mode, the air quality indicator light will be turned off.

        Why doesn’t the device turn on?

        Make sure the device is properly plugged into an electrical socket. Be sure the filter has been installed correctly and the panel is secured.

        How to reset WiFi on my air purifier?

        Press and hold the power button for 10 seconds, the LED will start to flash red & blue. The device is now ready to pair with your wifi. Note: Once the device’s WiFi has been reset, it will be removed from any existing accounts.

    • Using The Aspen Home App

      • How do I connect my unit to the Aspen Home App?

        To connect your smart air purifier to the Aspen Home App:
        1.) Press and hold the power button for 10 seconds (ignore the first beep at 3 seconds).
        2.) Once the light indicator turns to flashing red and blue, go onto the Aspen Home App.
        3.) Login or create an account on the Aspen Home App
        4.) Press the (+) at the top right corner of the screen
        5.) Select the Air Purifier on the Add Device section and follow the on-screen instructions to finish the pairing process

        How does the sleep mode work?

        On the Aspen Home App, select the air purifier you would like to put in sleep mode. Scroll down until you see the “Light” section with the toggle switch. Toggle the switch to the left to put the air purifier in sleep mode. Toggle the switch right to turn off sleep mode.

        Does the air purifier have child lock?

        On the Aspen Home App, select the air purifier you would like to put on child lock. Scroll down until you see the “Child Lock” section with the toggle switch. Toggle the switch left to turn child lock off. Toggle the switch the right to turn child lock on.

    • Warranty

      • What is the Warranty policy?

        1 Year Limited Warranty.

        What information do I need when I contact customer service for warranty?

        Please refer to the rating label on the back of the unit. This rating label has your unit’s serial number and other important information we need to assist you.

  • AB20 Box Fan

    • How to set up your Aspen Box Fan?
      The box fan does not work properly

      • Check that the power plug of the box fan is plugged in a 120 AC outlet.
      • Check to make sure that the outlet is not overloaded.
      • Check the power and make sure the box fan is turned on.

      The box fan does not turn on.

      • Check that the power plug of the tower fan is plugged in a 120 AC outlet.
      • Check to make sure that the outlet is not overloaded.
      • Replace the fuse in the plug by opening the latch on the plug.

      Plug fuse type and where to buy?

      • The plug fuse is 125V 5A (amp) with size: 3.6mm x10mm.
      • You could order it from Amazon or buy it at local Home Depot store.

      The Airflow has decreased.

      • Check that the air intake and exhaust are not blocked.
      • Check and make sure there are no objects obstructing the air flow intake.
      • The output may be blocked by dust. If so, please wipe off most of the dust or clog both on the rear or front grille, then use vacuum to clean the rest of the dust on the fan.

      The remote control does not operate the fan.

      • Make sure the battery is correctly installed. It requires 1 X CR2032 lithium battery 3V.
      • Make sure the remote is pointed toward the fan.
      • Make sure the battery is not expired.

      The fan(s) are missing parts?

      • Please contact the customer service department service@theaspen.com Or call 1-877-365-3464 M-F, 8am-3pm Pacific Time.
      • For the remote: Go to https://www.theaspen.com/collections/box-fan-accessories to purchase it.

      How do I store the fan?

      • Store in a dry place away from
      • Store the cord and the feet in the back of the fan compartment space.

      Remote Control Battery Replacement.

      • Pull and slide out the tab on the right side of the remote to remove the battery compartment
      • Replace the battery with a CR2032 Lithium Battery
      • Slide the tab back into position until it locks back into the remote

      How to turn on the fan if I lost my remote?

      Please use the “emergency button” located in the back of the fan above the power cord. The button only controls the fan speeds. First press = level 1, second press = level 2, third press = level 3, fourth press = Off.

Downloads